Hempel

Hempel Profair 1L Light Blue

Lightweight, 2-component epoxy fairing compound and filler with good adhesion and water resistance.
Easy to sand once fully cured.
Used above and below the waterline.

Sale price 59,50 € Regular price 85,00 €
30% off
Tax included. Shipping from €6.95. Final cost at checkout.

Varastossa

Payment methods
  • Klarna
  • Mastercard
  • MobilePay
  • Visa

Free collection from our store · 14-day right of withdrawal – see terms

Usually dispatched within 1–3 business days
Free pickup from store
Questions? Customer service will help you

Hempel's ProFair 35290 is a lightweight two-component epoxy filler that has good adhesion and is highly water-resistant.
Easy to sand when fully cured.
Suitable for use on fiberglass, hardwood, steel, and other hard materials.

Intended for interior and exterior use, both above and below the waterline.

1. As a filler and fairing compound for profiling large areas.
2. For detailed fairing where structural strength and flexibility are required.
3. Can be applied in film thicknesses up to 25 mm without sagging.

  • Lightweight, 2-component epoxy fairing compound and filler
  • Good adhesion and water resistance.
  • Easy to sand when the filler is fully cured.
  • Used above and below the waterline.
  • Mixing ratio: 1 : 1 by volume
  • Pot life: 1 hour at 20 °C
  • Fully cured: 7 days (20 °C)
  • Sandable: approx. 24 hours (20 °C)
  • Minimum application temperature 5°C

 

Signal word: Danger

Hazard statements:
H315: Causes skin irritation.
H317: May cause an allergic skin reaction.
H319: Causes serious eye irritation.
H411: Toxic to aquatic life with long lasting effects.

Precautionary statements:
Avoid breathing vapours, spray or mist. Wear protective gloves/protective clothing/
eye protection/face protection. Keep away from heat, hot surfaces, sparks, open flames and other
ignition sources. No smoking.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and
easy to do. Continue rinsing. Immediately call a POISON CENTER or doctor.
Store in a cool place.

Surface preparation and instructions for use: Ensure that the surface to be treated is clean, grease-free and dry. Wash the surface with Pre-Clean detergent.

Previously painted surfaces: Remove all loose material. Wash the surface with fresh water and allow to dry. Apply Profair up to 25mm thick. Allow to dry and overcoat with a suitable primer.

Unpainted surfaces: Apply 1-2 coats of epoxy primer before applying Profair and proceed as above.

Mix 1:1 just before use until an even colour is achieved. Avoid air bubbles in the finished mixture.

Pot life: 1 hour

Venemaalit.fi work instructions

Open work instructions (PDF) · FI / SV / EN ↗

Safety Data Sheet: Hempel Profair Base, Hempel Curing Agent

Product Data Sheet: Hempel Profair

Product description
Hempel's ProFair is a lightweight two-component epoxy filler with good adhesion and excellent water resistance. Easy to sand when fully cured.

Recommended use
Suitable for use on fiberglass, hardwood, steel and other hard materials. Intended for indoor and outdoor use above and below the waterline.

Features
– 1. As a filler and fairing compound for profiling large areas.
– 2. For detailed fairing where structural
strength and flexibility are required.
– 3. Can be applied up to 25 mm film thickness without sagging

Flash point
94°C [201°F]

VOC content, mixed product
22g/L

Handling
Handle with care. Read all warning and safety texts on the package and paint containers before and during use and follow local and national regulations during use. Always refer to Hempel's Safety Data Sheet for more detailed product information in addition to the product data sheet.

Product code
35290

Product components
Base 35299 Curing agent 98290

Standard shade / code
Light blue 30540

Gloss
Semi-gloss

Dry matter content
98 ± 2%

Specific gravity
0.8 kg/L [7 lb/US gal]

Dry film thickness, reference
1000 microns [39 mils]

Venemaalit.fi work instructions

Open work instructions (PDF) · FI / SV / EN ↗

Recently Viewed Products