Hempel

Hempel Pre-Clean 1L

Effective cleaning and degreasing agent.
It is suitable for pre-cleaning gelcoat, painted and lacquered surfaces, and for removing fuel, oil, grease, wax, and silicone.
Used before painting and for deep cleaning.

Sale price 16,80 € Regular price 21,00 €
20% off
Tax included. Shipping from €6.95. Final cost at checkout.

Varastossa

Payment methods
  • Klarna
  • Mastercard
  • MobilePay
  • Visa

Free collection from our store · 14-day right of withdrawal – see terms

Usually dispatched within 1–3 business days
Free pickup from store
Questions? Customer service will help you

Hempel's Pre-Clean is an effective detergent for pre-cleaning gelcoat and painted surfaces to remove fuel, oil, grease, wax and silicone. Use before painting and for deep cleaning.
• For general cleaning, use 1 part Hempel’s Pre-Clean to 20 parts water, and for more demanding cleaning, use a 1:10 ratio.
• Do not use on untreated wood that may absorb water.
Hempel’s Pre-Clean is also suitable for cleaning hardened paint from brushes.

Hempel Pre-Clean instructions: Here

Signal word: Danger

Hazard statements:
H318 - Causes serious eye damage.

Precautionary statements:
If medical advice is needed, have product container or label at hand. Keep out of reach of children.
Wear protective gloves/protective clothing/eye protection/face protection.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER or doctor/physician.
 

SURFACE PREPARATION: Remove loose dirt by rinsing the surface with fresh water.

APPLICATION:Shake well before use. Thin with: Fresh water: 1-20 parts fresh water to 1 part product. For more demanding tasks, use minimal thinning.

Apply the product with a sponge, soft brush, pad, or by spraying at the lowest possible pressure. After 5-10 minutes, rinse thoroughly with water until all residue is removed. Allow the surface to dry. If the product leaves a white film, it can be removed with warm water.

Do not use on surfaces sensitive to alkalis, such as aluminum or plastic windows. Do not expose to freezing. The surface temperature must be above: 5°C.

NEXT COAT:For a high gloss finish,use: HEMPEL’S CUSTOM MARINE POLISH 67444. Finish with:HEMPEL’S WAX 69033orHEMPEL’S WAX TecCel 69034.

Cleaning

– Rinse the surface with fresh water.

Application

Notes

– Thin with fresh water.
– Apply with a sponge, brush, or low-pressure hose. For
more demanding tasks, use minimal thinning.
– Ensure a 1:20 dilution for aluminum.
– Rinse thoroughly with water until all residue is removed.

Venemaalit.fi work instructions

Open work instructions (PDF) · FI / SV / EN ↗

Safety Data Sheet: Hempel Pre-Clean

Product Data Sheet: Hempel Pre-Clean

Product description: Hempel's Pre-Clean is an effective cleaner and degreaser.

Recommended use: It is suitable for pre-cleaning gelcoat, painted and varnished surfaces and for removing fuel, oil, grease, wax and silicone. Used before painting and for deep cleaning.

Flash point: 78°C [172°F]

VOC content: 30g/L

Handling
Handle with care. Refer to all warnings and safety texts on the packaging and paint containers before and during use and comply with local and national regulations during use. Always refer to the Hempel safety data sheet in addition to the product data sheet for more detailed product information.

Product code: 67602

Standard shade / code: – 98880

Dry matter content: 17 ± 2%

Specific gravity: 1 kg/L [9 lb/US gal]

Shelf life


Shelf life from date of manufacture when stored in original, unopened containers. The product quality must be checked after this. Always check the label for the best before date or use by date.

Storage conditions

  • The temperature must not fall below 0°C [32°F] during transport and storage.

 

Venemaalit.fi work instructions

Open work instructions (PDF) · FI / SV / EN ↗

Recently Viewed Products