BEFORE VARNISHING, USE FOR CLEANING:
Hempel's Pre-CleanAlways ensure that all surfaces are clean, oil-free, and dry. Clean the surface and remove any oil and greaseEpifanes Spraythinneror with a degreaser/thinner and dry sand with 220-grit sandpaper. Remove sanding dust with a tack cloth and degrease again.
VARNISHING:
Rapidcoat varnish does not need thinning, but can be thinned up to a maximum of 5% withEpifanes Brushthinnerthinner or 5-10% withEpifanes Spraythinnerthinner if applying with a spray gun. Apply the varnish in thin coats to the surface 5-6 times. Allow at least 5 hours to dry between coats. Intermediate sanding is not necessary but can be done for a more beautiful finish. In this case, sand with 280-320 grit sandpaper. Remove sanding dust with a tack cloth.
If Rapid varnishes are to be overcoated with other Epifanes varnishes (Clear Varnish, Wood Finish Gloss, or Rubbed Effect), then the surface must be sanded with 220-grit sandpaper before treatment, or 280-320 if it isEpifanes Rapidclear.
At the time of painting, the surface must be completely clean and dry, and its temperature must be above the dew point to prevent condensation. The moisture content of the wood must not exceed: 15%. Do not apply in direct sunlight. In enclosed spaces, ensure adequate ventilation during painting and drying.
NEXT VARNISH COAT:
By itself,Epifanes Clear Varnish,Epifanes Wood Finish Glossvarnish,Epifanes Rubbed Effectvarnish, orEpifanes Rapidclearvarnish.
THINNING:
When brushing:Epifanes Brushthinner, as per the instructions above.
When spraying:Epifanes Spraythinner, as per the instructions above.
Nozzle size for spraying: 1.3 mm – 1.5 mm (Spray gun, air).
Air pressure for spraying: 2 – 3 (Spray gun, air).
DRYING TIME:
Touch dry: 1 hour at 18°C.
Sandable dry: 2 hours at 18°C.
Recoatable:
Earliest: 5 – 6 hours at 18°C.
Latest: No restrictions
There is no maximum time limit for recoating, but if the surface has come into contact with oil or other contaminants, remove them thoroughly with an appropriate cleaner, rinse the surface with fresh water, and allow to dry. Lightly sand the surface and remove dust before repainting.
NOTE!: Stir the product well before use! Avoid direct sunlight and strong winds during application.
TOOLS:
Brush, Roller (foam), Spray gun.
