Hempel Profair 1L Light Blue

Surface preparation and instructions for use: Ensure that the surface to be treated is clean, grease-free and dry. Wash the surface with Pre-Clean detergent.

Previously painted surfaces: Remove all loose material. Wash the surface with fresh water and allow to dry. Apply Profair up to 25mm thick. Allow to dry and overcoat with a suitable primer.

Unpainted surfaces: Apply 1-2 coats of epoxy primer before applying Profair and proceed as above.

Mix 1:1 just before use until an even colour is achieved. Avoid air bubbles in the finished mixture.

Pot life: 1 hour

Safety Data Sheet: Hempel Profair Base, Hempel Curing Agent

Product Data Sheet: Hempel Profair

Product description
Hempel's ProFair is a lightweight two-component epoxy filler with good adhesion and excellent water resistance. Easy to sand when fully cured.

Recommended use
Suitable for use on fiberglass, hardwood, steel and other hard materials. Intended for indoor and outdoor use above and below the waterline.

Features
– 1. As a filler and fairing compound for profiling large areas.
– 2. For detailed fairing where structural
strength and flexibility are required.
– 3. Can be applied up to 25 mm film thickness without sagging

Flash point
94°C [201°F]

VOC content, mixed product
22g/L

Handling
Handle with care. Read all warning and safety texts on the package and paint containers before and during use and follow local and national regulations during use. Always refer to Hempel's Safety Data Sheet for more detailed product information in addition to the product data sheet.

Product code
35290

Product components
Base 35299 Curing agent 98290

Standard shade / code
Light blue 30540

Gloss
Semi-gloss

Dry matter content
98 ± 2%

Specific gravity
0.8 kg/L [7 lb/US gal]

Dry film thickness, reference
1000 microns [39 mils]