Purjeveneen vaalea kansi, luukku ja keulakaide.

Painting a boat deck and choosing a non-slip finish

Ari USA

Deck paint must suit the substrate and the wear it will face. Choose a ready-made non-slip deck coating or an approved additive, and test the surface texture before treating the whole deck.

What surface are you painting?

Smooth fibreglass, existing textured surfaces, wood and metal require different preparation. Wash off dirt and wax before sanding. Do not use a wire brush as a general method for all surfaces: it can damage the surface or leave metal particles.

Ready-made non-slip paint or anti-slip pearls?

Hempel Non-Slip Deck Coating is designed for decks. Add Anti-Slip Pearls only to paints approved by the manufacturer. The current Hempel instructions specify 50 g of pearls per 0.75 litre of paint; check your own packaging and test a small area. The previous general recommendation of 80 g is not the current instruction for this product.

Painting the deck

  1. Clean, repair and sand according to the substrate and the chosen coating system.
  2. Protect fittings, seals and areas that will not be painted.
  3. Apply a compatible primer if required.
  4. If using an anti-slip additive, mix it evenly into the paint. Apply a test area and assess both grip and ease of cleaning.
  5. Apply the paint coats as instructed and allow the coating to cure before walking on it.

A teak deck needs different treatment

Do not use these painting instructions for teak. For cleaning and oiling timber, see the teak care guide. A non-slip coating does not replace handrails or other safe ways of moving around the boat.

Related guides

Preparing a boat surface before painting · Teak care: cleaning and choosing teak oil · Painting a fibreglass boat above the waterline

Sources and detailed product instructions

Source updated 20 October 2026. Choose products according to the substrate and the existing coating. Follow the instructions for use and safety information on the packaging.

Products for the job

Need help choosing products and a coating system? Open VenemaaliGURU (in Finnish) →

Previous Next