Puupinnalle levitetään kirkasta pintakäsittelyainetta siveltimellä.

Preparing a boat surface before painting

Ari USA

Careful pre-treatment is a prerequisite for a successful painting job. The surface to be painted must be clean and grease-free.

Learn how to prepare your boat's surface by following the instructions shown in the video

Step 1

After cleaning, the surfaces to be painted must be sanded to the correct profile.

Step 2

After cleaning, the surfaces to be painted must be sanded to the correct profile.

Step 3

If the hull surface is damaged, fillers and fairing compounds may be needed.

Step 4

Once cured, sand the filled area and its surroundings to the correct shape. Allow the compound to cure.

Step 5

If you are using a two-component primer, ensure the correct ratio of base paint to hardener. Always read the label.

Step 6

Apply Primer. See the painting guide for how many coats to apply.

Need help choosing products and a coating system? Open VenemaaliGURU (in Finnish) →

Previous Next