Hempel Underwater Primer: when and how should it be used?
Underwater Primer is a one-component primer and tiecoat for antifouling systems. It does not replace an epoxy moisture barrier.
What is it suitable for?
The product is used in approved underwater systems and to improve adhesion of compatible antifouling coatings. The existing paint must be sound. A primer will not reattach flaking paint to the hull.
Work sequence
- Check the substrate and compatibility of the existing paint against the manufacturer's instructions.
- Wash, remove loose paint and sand only as instructed. Collect the paint waste.
- Stir the primer thoroughly and apply the coat specified in the product data sheet.
- Observe the overcoating interval for the actual temperature and apply the chosen compatible antifouling.
When should you choose another primer?
For epoxy priming or osmotic protection, consider the Light Primer or High Protect II system according to the substrate. Silic One requires its own approved primer–Tiecoat system; Underwater Primer is not a general substitute for Tiecoat.
Remember the waters where the boat is used
If you choose a biocidal antifouling, check its approval and the packaging. Biocidal antifouling paints must not be used in Finnish inland waters. A biocide-free alternative requires its own approved primer system.
Continue here
Which coating for your boat's bottom? A selection guide for lakes and the sea · Applying antifouling: preparation, painting and launching · Hempel Light Primer: epoxy priming guide
Sources and detailed product instructions
- Underwater Primer – product data sheet (PDF)
- Tukes: restrictions on antifouling use in Finland (in Finnish)
Translation checked against the Finnish guide on 13 November 2026. Choose products according to the substrate and existing coating. Follow the application and safety instructions on the packaging.
Products for this job
- Hempel Underwater Primer – adhesion primer for a compatible antifouling system
- Hempel Thinner 811 (823) (No 1) – use only as specified in the product instructions
- Hempel Light Primer – alternative epoxy priming where required
Need help choosing products and a coating system? Open VenemaaliGURU (in Finnish) →