Build a durable base for the topcoat and protect your boat's substrate. Hempel Light Primer is a two-component epoxy primer for fibreglass, plywood, steel and aluminium above and below the waterline. It helps prevent osmotic blistering in fibreglass and protects metal against corrosion. The number of coats and the application time for the next product are selected according to the complete coating system.
Varastossa
View product colour samples+×
Hempel Light Primer · colour samples for this product.
Choose a colour by clicking a sample or using the colour selector above. Screen colours are indicative; check the colour before painting.
Calculate how much you need +
Hempel Light Primer
Enter the area to see how much paint and how many tins you need.
Calculation: 8.2 m²/l/coat. Actual consumption may be higher. Select the number of coats for your project: one coat is usually not enough for a complete treatment of a new surface. Other products in the system are not included in the calculation. The number of coats depends on the substrate and protective film thickness. Check the complete priming system before ordering.
View product informationAsk about this product: Hempel Light Primer
0.375L / Off-White
Chat is loading. Try again shortly or email info@venemaalit.fi.
Free collection from our store · 14-day right of withdrawal – see terms
When a boat's primer must protect the substrate rather than simply cover its colour, Hempel Light Primer forms part of the actual protective system. This solvent-borne two-component epoxy primer is used on fibreglass, plywood, steel and aluminium. It is suitable for interior and exterior use, above and below the waterline, including protection of keels and rudders.
On fibreglass, priming helps prevent osmotic blistering. On metal, its purpose is to protect against corrosion as part of a correctly prepared system with sufficient film thickness. Washing, dryness, abrasion and cleaning of the metal determine adhesion. First seal plywood with a suitable wood sealer according to the manufacturer's instructions.
Work on a new bare substrate differs from maintenance of an existing sound primer. The product data sheet specifies a multi-coat system for a new underwater surface, but one full maintenance coat for a previously treated and correctly prepared surface. Aluminium protection is not assessed by coat count alone: the epoxy system's total dry film thickness must be at least 300 micrometres.
Choose the next treatment before priming as well. Antifouling, Underwater Primer and Silic One Tiecoat each require their own overcoating interval; Light Primer's interval for recoating with itself is not a common application window for them. The paint is mixed from a base and curing agent, so prepare only the amount you can use within the working time. This is not a universal primer to apply over an old one-component paint without checking compatibility.
Detailed work instructions, the manufacturer's product data sheets and downloadable materials are available on the Additional Information tab.
- Prepare the substrate. Remove grease and dirt. Sand fibreglass and existing compatible primer, remove dust and allow to dry. Seal plywood with a suitable wood sealer. Remove salts, rust and loose material from steel; prepare aluminium using the non-metallic blasting abrasive specified by the manufacturer. Do not apply 2K epoxy over an unknown or incompatible 1K paint.
- Mix 2:1. Mix base 45559 and curing agent 95360 in a 2:1 ratio by volume. Mix thoroughly and wait a few minutes for air bubbles to escape. At +20 °C, pot life is 6 h for brush application and 2 h for spray application.
- Thin only the mixture, if necessary. Thinning and tool cleaning: Thinner 845 / 08451. For brush, roller and paint pad application, maximum 20 %; do not thin the components separately. Thinning reduces the resulting film thickness.
- Achieve the system's required film thickness. PDS: 3–5 coats on a new bare underwater surface, 2 coats above the waterline and 1 full unthinned coat on a previously treated surface. Reference coat: 60 µm dry / 122 µm wet, theoretical coverage 8,2 m²/l. Total epoxy film on aluminium: at least 300 µm. Select the complete system appropriate to the work.
- Maintain suitable conditions. Surface temperature above +10 °C during application and curing. Relative humidity below 85 %. Maintain ventilation and prevent dew forming on the fresh surface.
- Observe the next product's own interval. At +20 °C: Light Primer → Light Primer 4½ h–30 days; → Underwater Primer 65 min–4 h; → Silic One Tiecoat 2–4 h. The corresponding +10 °C table values are 9 h–60 days, 2–8 h and 4–8 h; the table's reference temperature does not change the requirement to work above +10 °C. If the maximum interval is exceeded, check the retreatment requirements.
- Finish with the selected system. Light Primer alone does not determine when the boat can be launched. Follow the topcoat's and complete system's instructions for putting into service. At +20 °C, the PDS gives full drying as 7 days and readiness for sanding as 48 h. Read the SDSs and package labels for both components.
Download the detailed work instructions and the manufacturer's technical documents from the Additional Information tab.
Venemaalit.fi work instructions
Open work instructions (PDF) · FI / SV / EN ↗| Type | 2K solvent-borne epoxy primer |
|---|---|
| Components | Base 45559 / curing agent 95360 |
| Mixing ratio | 2:1 by volume |
| Pot life at +20 °C | Brush 6 h / spray 2 h |
| Thinner / cleaning | Thinner 845 / 08451 |
| Reference film | 60 µm dry / 122 µm wet |
| Theoretical coverage | 8,2 m²/l at the reference film thickness |
| Temperature / humidity | Surface above +10 °C, RH below 85 % |
| Putting into service | According to the next coating and complete system |
Downloadable materials
Manufacturer's product data sheet (PDF)
- Hempel Light Primer, Off-White 11630 base – safety data sheet 4555911630 (PDF)
- Hempel Light Primer, Stone Grey 12170 base – safety data sheet 4555912170 (PDF)
- Hempel Light Primer, curing agent 95360 – safety data sheet 9536000000 (PDF)
Safety
The following information was checked against the Finland-specific safety data sheets linked above. Also check the labelling on your own package and all protective measures specified in the SDS.
Light Primer, Off-White 11630 base, Light Primer, Stone Grey 12170 base: Danger.
- H226 – Flammable liquid and vapour.
- H315 – Causes skin irritation.
- H317 – May cause an allergic skin reaction.
- H318 – Causes serious eye damage.
- H412 – Harmful to aquatic life with long lasting effects.
Light Primer, curing agent 95360: Danger.
- H226 – Flammable liquid and vapour.
- H315 – Causes skin irritation.
- H317 – May cause an allergic skin reaction.
- H318 – Causes serious eye damage.
- H332 – Harmful if inhaled.
- H412 – Harmful to aquatic life with long lasting effects.
The separate base SDSs for Black and Blue are still to be added in this review version. Do not assume that the base SDSs provided here apply to other shades.
Venemaalit.fi work instructions
Open work instructions (PDF) · FI / SV / EN ↗
Hempel Light Primer
0.375L / Off-WhiteGet notified when this item is back in stock
- 5 stars: 1 (100%)
- 4 stars: 0 (0%)
- 3 stars: 0 (0%)
- 2 stars: 0 (0%)
- 1 star: 0 (0%)
35 jalkaisen purkkarin pohjan uusiminen vaati reilut 20 litraa primeria joten on sanomattakin selvää, että sitä kannattaa ostaa isossa purkissa. Ja kun yhteen kerrokseen tarvitsin noin 3 litraa, oli pienemmät purkit sopimattomia.
Primerin päälle maalasin Silic One, eli ensin Tiecoat ja sitten itse silikonimaali. Liikkeen hyvillä neuvoilla (eli, varmista, ettei primeri ehdi kuivua täysin, ennen Tiecoatin maalausta), sain maalit tarttumaan hyvin. Tiecoat ei tartu, ellei primeri ole hieman märkä - ainakaan pienen testin perusteella, eli siinä mielessä silikoniväri eroaa hieman perinteisistä pohjamaaleista.
Kiitos Kenneth perusteellisesta arvostelusta!
Hienoa kuulla, että 35-jalkaisen purjeveneen pohjaremontti onnistui ja että neuvoistamme oli hyötyä!
Silic One -järjestelmässä maalausvälien noudattaminen on tosiaan erityisen tärkeää, jotta kerrokset tarttuvat kunnolla toisiinsa. Mukava myös kuulla käytännön kokemuksistasi.
Toivottavasti uusi pohja toimii odotusten mukaisesti ja edessä on monta hyvää purjehduskautta!
Terveisin
Lauri /Venemaalit