Ensure adhesion between the Silic One surface and the correct epoxy primer. Hempel Silic One Tiecoat is a silicone-based tiecoat between Light Primer or Conversion Primer and Silic One. The yellow intermediate coat is part of the system and must not be replaced with an ordinary primer. Apply without thinning and overcoat within the temperature-dependent application window.
Varastossa
View product colour samples+×
Hempel SILIC ONE TIECOAT Yellow · colour samples for this product.
- 23410Yellow
Screen colours are indicative; check the colour before painting.
Calculate how much you need +
Hempel SILIC ONE TIECOAT Yellow
Enter the area to see how much paint and how many tins you need.
Calculation: 10.0 m²/l/coat. Actual consumption may be higher. Select the number of coats for your project: one coat is usually not enough for a complete treatment of a new surface. Other products in the system are not included in the calculation.
View product informationFree collection from our store · 14-day right of withdrawal – see terms
Hempel Silic One Tiecoat connects the epoxy primer to the silicone-based Silic One topcoat. Its purpose is to ensure adhesion between Light Primeror Conversion Primerand the finished fouling-release coating. It is a tiecoat belonging to the system, not a general substitute for protective hull priming or the final topcoat.
Sound existing epoxy primer can be retained when the surface is sanded, cleaned and treated with a new coat of Light Primer . Conversion over firmly adhering old antifouling is carried out using Conversion Primer. Remove damaged and loose layers before building the new system. The entire bottom is therefore not treated in the same way regardless of the existing surface.
The timing of the work determines adhesion. The interval for applying Tiecoat over epoxy and the interval for applying Silic Oneover Tiecoat are two separate limits. Check both before starting and divide a large surface into manageable working areas. Pot life does not replace these overcoating intervals for an already coated surface.
Apply Tiecoat as one unthinned coat by brush or roller. Close the can after pouring the working quantity into the tray and avoid unnecessary drying in the container. Finish the system with Silic Oneaccording to its own instructions for coat count and launching. Clean tools and suitable conditions are part of the same adhesion system.
Detailed work instructions, the manufacturer’s product data sheets and downloadable materials are available on the Additional Information tab.
- Prepare the system's base. Sound existing epoxy primer: sand, clean, dry and apply 1 coat of Light Primer. Sound antifouling: prepare and apply Conversion Primer. Remove loose or damaged paint; prime bare areas according to the substrate.
- Observe the epoxy adhesion window. Light Primer / Conversion Primer → Tiecoat: +20 °C 2–4 h, +10 °C 4–8 h. The surface must remain above +10 °C during application and curing. If the window is exceeded, apply a new coat of primer according to the system instructions.
- Stir and apply. Stir thoroughly. Apply 1 coat by brush or roller, without thinning. Reference film: 70 µm dry / 105 µm wet, 10 m²/l. The PDS gives a pot life of 60 min at +20 °C. Close the can after filling the tray.
- Keep conditions stable. Surface above +10 °C during application and curing; RH 30–85 % in both stages. Prevent condensation and provide ventilation.
- Apply Silic One on time. Tiecoat → Silic One: +20 °C 8–48 h; +10 °C 16–48 h; +30 °C 4–24 h. If the interval between Tiecoat and the topcoat is exceeded, a new tiecoat is required according to the system instructions.
- Finish and clean. Follow Silic One's instructions for coats and launching. Clean tools with Thinner 808; do not add it to Tiecoat. Follow the protective measures in the SDS and on the package.
Download the detailed work instructions and the manufacturer’s technical documents from the Additional Information tab.
Venemaalit.fi work instructions
Open work instructions (PDF) · FI / SV / EN ↗| Type | Silicone-based tiecoat |
|---|---|
| Undercoat / topcoat | Light Primer or Conversion Primer / Silic One |
| Coats / thinning | 1 / do not thin |
| Film thickness / coverage | 70 µm dry / 105 µm wet; 10 m²/l |
| Conditions | Surface above +10 °C; RH 30–85 % |
| Silic One application at +20 °C | 8–48 h |
| Tool cleaning | Thinner 808 |
Downloadable materials
Manufacturer’s product data sheet, Finnish (PDF)
Safety
The following information was checked against the Finland-specific safety data sheets linked above. Also check the labelling on your own package and all protective measures specified in the SDS.
Silic One Tiecoat 23410: Warning.
- H226 – Flammable liquid and vapour.
- H412 – Harmful to aquatic life with long lasting effects.
Manufacturer’s system guides
- Hempel Silic One system brochure, Finnish (PDF, 2025)
- Hempel Silic One damage repair guide, Finnish (PDF, 2024)
Original manufacturer documents. Check the current product data sheet and package instructions for your own product; the brochure does not replace them.
Venemaalit.fi work instructions
Open work instructions (PDF) · FI / SV / EN ↗
Hempel SILIC ONE TIECOAT Ye...
0.75LGet notified when this item is back in stock
- 5 stars: 0 (0%)
- 4 stars: 0 (0%)
- 3 stars: 1 (50%)
- 2 stars: 0 (0%)
- 1 star: 1 (50%)
Toimitettu päiväysvanhoja maaleja
Hei Antti, kiitos palautteestasi.
Toimitettu maali ei ole päiväysvanha, vaan sen päiväys 'umpeutuu' kesäkuu 2026 lopussa. Lisäksi purkissa oleva merkintä 7/26 tarkoittaa valmistajan ilmoittamaa “best before” -ajankohtaa, jonka loppuun asti tuote on valmistajan mukaan parhaimmillaan. Kyse ei ole viimeisestä käyttöpäivästä eikä siitä, että maali olisi kyseisen päivän jälkeen pilalla.
Oikein säilytettynä avaamaton maali säilyy yleensä käyttökelpoisena myös tämän jälkeen, usein 6–12 kuukautta. Maali on siis täysin normaali myyntituote eikä vanhentunut tuote.
myyjä liikkeen toiminta oli heikon puoleinen.
Hei Vesa, kiitos palautteestasi.
Ikävä kuulla, että toimintamme jäi mielestäsi heikon puoleiseksi. Haluaisimme mielellämme ymmärtää tarkemmin, mikä tilauksessa tai palvelussa ei toiminut odotetulla tavalla.
Jos voit tarkentaa, oliko kyse esimerkiksi toimituksesta, tuotetiedoista, asiakaspalvelusta, saatavuudesta tai jostain muusta, selvitämme asian ja pyrimme parantamaan toimintaamme.
Ystävällisin terveisin,
venemaalit.fi