Hempel

Hempel SILIC ONE

4.7(3 reviews)

Create a smooth, silicone-based, biocide-free surface on your boat’s hull. Hempel Silic One reduces fouling adhesion with a hydrogel micro-layer and forms part of a system built with epoxy priming and Tiecoat. It is suitable for correctly prepared fibreglass, steel or aluminium boats. Initial application and subsequent maintenance require different coating schedules.

Sale price 56,00 € Regular price 80,00 €
30% off
Tax included. Shipping from €6.95. Final cost at checkout.

Varastossa

Paint can size: 0.75L
HEMPEL COLOUR: 19990 Black
View product colour samples

Hempel SILIC ONE · colour samples for this product.

Choose a colour by clicking a sample or using the colour selector above. Screen colours are indicative; check the colour before painting.

Silic One Premium DealerVenemaalit.fi · Specialist retailer for the Silic One systemWe keep products fresh: through the Premium Dealer partnership, Hempel replaces Silic One products approaching the end of their shelf life with fresh products.
Calculate how much you need

Hempel SILIC ONE

Enter the area to see how much paint and how many tins you need.

Calculation: 10.0 m²/l/coat. Actual consumption may be higher. Select the number of coats for your project: one coat is usually not enough for a complete treatment of a new surface. Other products in the system are not included in the calculation. Use 1 coat for maintenance of an intact Silic One surface and 2 coats for first application. Primers are calculated separately.

View product information
Payment methods
  • Klarna
  • Mastercard
  • MobilePay
  • Visa

Ask about this product: Hempel SILIC ONE

0.75L / 19990 Black

Chat is loading. Try again shortly or email info@venemaalit.fi.

Free collection from our store · 14-day right of withdrawal – see terms

Usually dispatched within 1–3 business days
Free pickup from store
Questions? Customer service will help you

Hempel Silic One protects the underwater hull with a silicone-based fouling-release system. The biocide-free coating’s hydrogel micro-layer creates a smooth, low-friction surface. Our store recommends the system for fibreglass, steel and aluminium boats with correctly primed substrates. Conventional timber or plywood hulls require another system suited to their material.

Silic One requires Silic One Tiecoat beneath it. Depending on the existing surface, the Tiecoat in turn requires Light Primer or Conversion Primer and the protective priming required for the hull material. Do not apply the topcoat directly to a bare hull or an arbitrary old antifouling coating. Apply two coats of Silic One for the initial treatment.

Maintenance painting is different from building a completely new system. Minor surface damage or exposed yellow Tiecoat can be repaired using Silic One’s own repair instructions. Deeper damage also requires restoration of the underlying layers. An Infinity treatment may be suitable for seasonal maintenance of an intact system when its substrate requirements are met.

The manufacturer’s stated two-year service life on hulls is a starting point for maintenance planning, not a promise of a fouling-free boat in all conditions. Assess cleaning needs during use. Apply without thinning, and observe the separate timing requirements for the primer, tiecoat and topcoats before launching.

Detailed work instructions, the manufacturer’s product data sheets and downloadable materials are available on the Additional Information tab.

  1. Select and prepare the substrate. Apply the protective priming required for fibreglass, steel or aluminium. Where appropriate, retain sound existing epoxy as the base for a maintenance coat. Apply Silic One only over Silic One Tiecoat, never directly to the hull or conventional antifouling.
  2. Overcoat the Tiecoat within the specified interval. Tiecoat → Silic One: 8–48 h at +20 °C; 16–48 h at +10 °C; 4–24 h at +30 °C. If the interval is exceeded, apply a new tiecoat according to the system instructions.
  3. Stir and apply. Stir thoroughly. For initial application, apply 2 coats by brush or roller; do not thin. The PDS gives a pot life of 60 min at +20 °C. Close the can after filling the tray. Reference film thickness: 80 µm dry / 102 µm wet; 10 m²/l.
  4. Control conditions and recoating time. Keep the surface above +10 °C during application and curing; RH 30–85 %. Silic One → Silic One: at least 16 h at the PDS table temperatures of +10 / +20 / +30 °C; the table gives no maximum interval. Keep the surface clean.
  5. Wait before launching. PDS: at least 24 h at +20 °C, and no later than 1 month. Do not assume the same launching time at other temperatures. Hard dry after 2 h and fully dry after 3 days at +20 °C are not the same as the launching interval.
  6. Maintain and repair. Clean gently with a soft sponge and fresh water; the PDS also mentions Boat Shampoo. For minor damage or exposed yellow Tiecoat, apply 1 local coat of Silic One slightly beyond the damaged area and, when recoating, 1 coat over the entire underwater area. Repair deeper damage down to the priming system. Clean tools with Thinner 808; check the shade-specific SDSs.

Download the detailed work instructions and the manufacturer’s technical documents from the Additional Information tab.

Venemaalit.fi work instructions

Open work instructions (PDF) · FI / SV / EN ↗
TypeBiocide-free silicone-based topcoat
TiecoatSilic One Tiecoat 27450
Initial application / thinning2 coats / do not thin
Film thickness / coverage80 µm dry / 102 µm wet; 10 m²/l
ConditionsSurface above +10 °C; RH 30–85 %
Recoating interval with the same productAt least 16 h at the table temperatures of +10 / +20 / +30 °C
LaunchingAt least 24 h at +20 °C; no later than 1 month

Downloadable materials

Manufacturer’s product data sheet, Finnish (PDF)

Safety

The following information was checked against the Finland-specific safety data sheets linked above. Also check the labelling on your own package and all protective measures specified in the SDS.

Silic One Black 19990, Silic One True Blue 30390, Silic One Red 59151: Warning.

  • H226 – Flammable liquid and vapour.
  • H412 – Harmful to aquatic life with long lasting effects.

Manufacturer’s system guides

Original manufacturer documents. Check the current product data sheet and package instructions for your own product; the brochure does not replace them.

Venemaalit.fi work instructions

Open work instructions (PDF) · FI / SV / EN ↗
  • 5 stars: 2 (67%)
  • 4 stars: 1 (33%)
  • 3 stars: 0 (0%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
I
Ilmari K.

Jo 4. kesä SilicOne-maalin turvin. Näkki ei lainkaan tartu, jos paljon ajoa. Vaikka tarttuisi pitkään laiturissa seisoessaan, lähtee taas vauhdissa irti tai ylös nostettuna sienen päällä hipaisemalla.

Hienoa kuulla, että Hempel Silic One on toiminut veneessäsi jo neljän kauden ajan näin hyvin. Erityisen arvokas havainto on, että mahdollinen kasvusto irtoaa ajossa tai erittäin kevyesti puhdistamalla veneen noston jälkeen.

Kiitos arvostelusta ja turvallisia veneilykilometrejä!

J
Jarmo N.

Hyvä tuote. Hieman työllistävä ensimmäisellä kerralla, kun vaatii tuon välimaalin. Ensimmäisen kesän jälkeen pohja oli lähes puhdas, vain hieman pyyhkimällä lähtevää limaa, vaikka vene seisoi melkein koko kesän laiturissa merivedessä. Toisena keväänä pohjalle ei tehty mitään ja syksyllä siellä oli melko paljon näkkiä ja muuta kasvustoa. Nyt kolmanneksi kesäksi pohjaan vedettiin yksi uusi kerros Silic Onea, saa nähdä miltä näyttää syksyllä.

Hei Jarmo, kiitos erittäin hyvästä ja käytännönläheisestä arvostelusta!

Kuvaat hyvin Silic One -järjestelmän luonnetta: ensimmäisellä kerralla työvaiheita on enemmän, koska järjestelmä vaatii myös Tiecoatin eli välimaalin. Kun pohjatyöt on tehty oikein, ylläpito on kuitenkin jatkossa huomattavasti kevyempää kuin perinteisillä antifouling-maaleilla.

Hyvä kuulla, että ensimmäisen kesän jälkeen pohja oli lähes puhdas pelkällä kevyellä pyyhinnällä. Jos pohja jätetään seuraavana keväänä kokonaan käsittelemättä, teho voi luonnollisesti heikentyä, kuten kokemuksestasi näkyi.

Jatkossa kannattaa harkita Hempel Silic One Infinity -pinnoitetta. Sen ideana on “ladata” Silic One -pinta uudelleen ilman, että pohjaan tarvitsee joka kerta maalata uutta Silic One -kerrosta. Se tekee ylläpidosta selvästi helpompaa.

Toivottavasti tämän kesän jälkeen pohja näyttää taas hyvältä.

Ystävällisin terveisin,
venemaalit.fi

H
Henrik M.

Hyvä palvelu. Helposti levittyi

Hei Henrik, kiitos arvostelustasi!

Mukava kuulla, että palvelu oli hyvää ja Hempel Silic One levittyi helposti. Toivottavasti pohja pysyy hyvin puhtaana koko kauden.

Ystävällisin terveisin,
venemaalit.fi

Recently Viewed Products