Hempel Gelcoat Cleaning Powder 0.75kg

Instructions for use:
Mix the product with enough fresh water to form a paste.
Apply a layer of the product.
After approximately 10-20 minutes, while the paste is still moist, clean
the surface by scrubbing with a soft brush.
Rinse thoroughly with plenty of water until all residues are removed.
The product contains acidic components. Stainless steel
parts should not come into contact with the product, as this may cause discolouration.
Apply Hempel’s Custom Marine Polishto achieve a protective,
glossy surface. For a high-gloss and durable finish, apply Hempel’s Waxor Hempel’s Wax TecCelwax.

Safety Data Sheet: Hempel Gelcoat Cleaning Powder

Product Data Sheet: Hempel Gelcoat Cleaning Powder

Product description
Hempel’s Gelcoat Cleaning Powder is an effective cleaning powder for removing stubborn dirt from gelcoat surfaces.

Recommended use
Removes yellowish stains, rust stains, exhaust gas residues, stubborn dirt and soot, as well as the brownish area at the waterline, which is common especially in inland waters and brackish water areas. Very suitable for cleaning large, dirt-accumulating areas, such as anti-slip decks.

VOC content
0g/L

Handling
Handle with care. Refer to all warning and safety texts on the packaging and paint containers before and during use, and comply with local and national regulations during use. Always refer to Hempel's Safety Data Sheet for more detailed product information in addition to the Product Data Sheet.

Product code
67536

Standard shade / code
Light grey 99980

Solids content
100 ± 2%

Specific gravity
1.8 kg/L [15 lb/US gal]