Hempel

Hempel Epoxy Filler

2-component epoxy filler. Easy to sand. Used above and below the waterline on fiberglass, metal, and plywood surfaces.

Sale price 18,20 € Regular price 26,00 €
30% off
Tax included. Shipping from €6.95. Final cost at checkout.

Varastossa

Size: 130ml
Colour: Light Grey
Payment methods
  • Klarna
  • Mastercard
  • MobilePay
  • Visa

Free collection from our store · 14-day right of withdrawal – see terms

Usually dispatched within 1–3 business days
Free pickup from store
Questions? Customer service will help you

Coverage: 1m2/L
Thinner:
Do not thin

Signal word: Danger

Hazard statements:
H315 - Causes skin irritation.
H317 - May cause an allergic skin reaction.
H319 - Causes serious eye irritation.
H411 - Toxic to aquatic life with long lasting effects.

Precautionary statements:
Avoid breathing vapour, spray or mist. Wear protective gloves/protective clothing/
eye protection/face protection. Keep away from heat, hot surfaces, sparks, open flames and other
ignition sources. No smoking.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present
and easy to do. Continue rinsing. Immediately call a POISON CENTER or doctor.
Store in a cool place.

Surface preparation:Always ensure all surfaces are clean, oil-free, and dry. Clean the surface, removing any oil and grease with a suitable cleaning agent, then sand the surface with dry sandpaper.

Unpainted surface:Sand the surface and remove dust. Prime with 1–2 coats of specifiedHempel's Light Primer.

Previously treated surface:Sand, clean, and dry the surface.

Mixing:BASE 5259: CURING AGENT 95250
1 : 1 by volume. Mix equal parts of both components together immediately before use until the color is uniform. Avoid air bubbles in the mixture.

Application: The product can be applied in a layer of up to 5 mm to damaged, level, spot-repaired areas that are dry, before overcoating with 2 coats of specifiedHempel Light Primer. Use a one-component primer if overcoating with a one-component topcoat.

Shelf life: 3 years (refer to product manufacturing date)

 

Venemaalit.fi work instructions

Open work instructions (PDF) · FI / SV / EN ↗

Safety Data Sheet: Hempel Epoxy Filler

Product Data Sheet: Hempel Epoxy Filler

Product descriptionHEMPEL EPOXY FILLER 35253 is a two-component, solvent-free epoxy filler. It is especially suitable for repairing cracks, gaps and minor damage.

Recommended useSuitable for use on fiberglass, hard wood, steel and other hard materials. Intended for interior and exterior use, both above and below the waterline.

Features1. For surfaces particularly suited to smooth filling.2. For filling small pinholes in welds and dents in propellers, keels and similar areas.3. Repair of osmosis damage in fiberglass hulls.

Shade number/Shade: 19810 / Light GreyGloss level: MattSolids content, %:100Theoretical spreading rate:1 m2/l [40.1 sq.ft./US gallon] – 1 mm /40 milsFlash point:70 °C [158 °F]Specific gravity:1.6 kg/litre [13.3 lbs/US gallon]Touch dry:8 hours at 20°C/68°F 18 hours at 10°C/50°FSand dry:16 hours at 20°C/68°F 36 hours at 10°C/50°FFully cured:5 days at 20°C/68°F 12 days at 10°C/50°FVOC content:10 g/l [0.1 lbs/US gallon]Shelf life:3 years at 25°C/77°F

 

Venemaalit.fi work instructions

Open work instructions (PDF) · FI / SV / EN ↗

Recently Viewed Products