Hempel

Hempel EcoPower Prop Spray 0.5L

Hempel's EcoPower Prop 7446X – A biocide-free spray paint that keeps propellers, trim tabs and sterndrives clean from fouling and easy to clean. Self-renewal is controlled by advanced binder technology throughout the boating season without paint build-up.
A chalking/polishing sterndrive paint (not an antifouling paint). Can be painted directly onto the sterndrive after degreasing and sanding. Only bare aluminium needs to be primed.

Sale price 28,70 € Regular price 41,00 €
30% off
Tax included. Shipping from €6.95. Final cost at checkout.

Varastossa

Colour: Black
View product colour samples

Hempel EcoPower Prop Spray 0.5L · colour samples for this product.

Upper sample: dry, before launching. Lower sample: wet, immersed.

Choose a colour by clicking a sample or using the colour selector above. Screen colours are indicative; check the colour before painting.

Calculate how much you need

Hempel EcoPower Prop Spray 0.5L

Enter the area to see how much paint and how many tins you need.

Calculation: 11.0 m²/l/coat. Actual consumption may be higher. Select the number of coats for your project: one coat is usually not enough for a complete treatment of a new surface. Other products in the system are not included in the calculation.

View product information
Payment methods
  • Klarna
  • Mastercard
  • MobilePay
  • Visa

Free collection from our store · 14-day right of withdrawal – see terms

Usually dispatched within 1–3 business days
Free pickup from store
Questions? Customer service will help you

Hempel's EcoPower Prop 7446X (Mille Drive) – Biocide-free spray paint that keeps propellers, trim tabs and sterndrives clean from growth and easy to clean. Self-renewal is controlled by advanced binder technology throughout the boating season without paint accumulation.

Previous coat of paint: Hempel’s Underwater Primer, Hempel Prop Primer

Next coat of paint: –

Signal word: Danger

Hazard statements:
H222, H229 - Extremely flammable aerosol. Pressurised container: May burst if heated. H335 - May cause respiratory irritation.
H336 - May cause drowsiness or dizziness.
H351 - Suspected of causing cancer.
H411 - Toxic to aquatic life with long lasting effects.

Precautionary statements:
Avoid breathing vapours, spray or mists. Wear protective gloves/protective clothing/
eye protection/face protection. Keep away from heat, hot surfaces, sparks, open flames and other
ignition sources. No smoking.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER or doctor.
Store in a cool place.

Surface preparation:
Always ensure all surfaces are clean, oil-free, and dry. Clean the surface and remove any oil and grease with a suitable cleaner, then sand the surface with dry sandpaper. Carefully remove dust with fresh water.

Unpainted surface:
Apply Hempel Light Primerto the pre-treated surface, followed by Hempel Underwater Primeradhesion primer while the epoxy surface is still tacky.

Previously treated surface:

Old self-polishing or traditional antifouling paint:
Remove loose material and other contaminants by cleaning with high-pressure fresh water. Allow to dry.

Current hard antifouling paint or unknown antifouling paint:
Clean with high-pressure fresh water, wet sand, remove dust. Clean and dry the surface. If the old antifouling paint is in poor condition, apply one coat of
Hempel’s Underwater Primeradhesion primer.
If the old antifouling paint is generally in poor condition, it is recommended to remove previous layers and re-prime the surface before applying antifouling paint.

Application:

Mask off other areas, including anodes, before use. Shake well before use. Spray from a distance of 20–30 cm from the surface. Apply the product one coat at a time until the surface is smooth and even (minimum 4 coats). Shake the can periodically during use. Spray upside down at the end of spraying to clean the nozzle. Wear protective gloves/clothing and eye/face protection.
If the surface has been primed with Hempel’s Light Primeror Hempel Light Primer Sprayepoxy primer, spray the product onto the surface while the primer is still tacky.
The surface must be completely clean and dry at the time of application, and its temperature must be above the dew point to avoid condensation. Do not apply in direct sunlight. In enclosed spaces, adequate ventilation must be ensured during painting and drying.

Before painting, use for cleaning:

Hempelin Pre-Clean

Before painting, use as primer:

Hempel’s Prop Primer

Hempel’s Underwater Primer

Does not necessarily require any primer

Thinning:

Do not thin.

Drying times:

Touch dry: 20 minutes, 20°C and 40 minutes, 10°C
Recoat time
Minimum: approximately 40 minutes at 20°C or 60 minutes at 10°C
Maximum: No restrictions

NOTE:
Handle with care. Refer to all warning and safety texts and HEMPEL safety data sheets before use, and comply with local and national regulations during use.

Maintenance and repair

– Old self-polishing or traditional antifouling paint: Remove
loose material and other contaminants by cleaning with
high-pressure fresh water.
– Current hard antifouling paint or unknown antifouling paint:
Clean with high-pressure fresh water, wet sand, remove dust.
– Clean and dry the surface.
– If the old antifouling paint is in poor condition, apply one coat of
Hempel’s Underwater Primeradhesion primer.
– If the old antifouling paint is generally in poor condition, it is recommended to remove previous layers and re-prime the surface
before applying antifouling paint.

Cleaning agent

Hempel’s Thinner 808

Application conditions

– Apply only to dry and clean surfaces.

Notes

– Mask off other areas, including anodes, before use.
– Shake well before use.
– Spray from a distance of 20–30 cm from the surface. Apply the product one
coat at a time until the surface is smooth and even. Shake the can periodically during use. Spray upside down at the end of spraying to clean the nozzle.
– Recoat with the selected antifouling paint.
– If the surface has been primed with Hempel’s Light Primeror Hempel’s Light Primer Sprayepoxy primer, spray the product onto the surface while the primer is still tacky.

Product compatibility

– Previous paint layer: Recommended products are: Hempel’s Prop Primer, Hempel’s Underwater Primer
– Subsequent paint layer: None.

Drying conditions

– To achieve the stated drying time, it is important to maintain adequate ventilation during painting, drying, and curing.
– Condensation on a freshly applied coat should be avoided.

Notes on recoating

– The product has no maximum recoating interval, but before recoating, carefully clean soiled surfaces with high-pressure fresh water wash and allow them to dry.

Storage conditions

– The product must be stored in accordance with local legislation requirements, at a temperature of 5°C [41°F], protected from direct sunlight, rain, and snow.

Venemaalit.fi work instructions

Open work instructions (PDF) · FI / SV / EN ↗

Safety Data Sheet: Hempel EcoPower Prop Spray

Product Data Sheet: Hempel EcoPower Prop Spray

Product description
Biocide-free spray paint, Ecopower Prop is used as a coating for propellers and stern drives. This coating prevents vegetation from attaching properly, and surfaces are easily cleaned of any vegetation that may attach during the season.
Self-renewal is controlled throughout the boating season by advanced binder technology without paint build-up.

Flash point
35°C [95°F]

VOC content
686g/L

Handling
Handle with care. Refer to all warning and safety texts on the packaging and paint containers before and during use, and observe local and national regulations during use. Always refer to Hempel's Safety Data Sheet in addition to the Product Data Sheet for more detailed product information.

Product code
7446X

Standard colours
Black and Penta Grey

Gloss
Semi-matt

Dry content
28 ± 2%

Specific gravity
1 kg/L [8 lb/US gal]

Dry film thickness, reference
25 microns [1.0 mils]

 

Venemaalit.fi work instructions

Open work instructions (PDF) · FI / SV / EN ↗

Recently Viewed Products