Le Tonkinois Öljylakka, also known as Vernis, gives wood a clear, glossy finish indoors and outdoors. Based on linseed and tung oils, the varnish is applied in thin coats; it is normally used unthinned for brush application. The wood grain remains visible. Plan the coat count according to the application and allow drying time between coats.
Varastossa
Calculate how much you need +
Let Oil Varnish
Enter the area to see how much paint and how many tins you need.
14.0 m²/l/coat. Consumption is an approximate estimate for unthinned varnish. Thinning the initial coats can reduce the proportion of varnish in the applied mixture, but wood absorption, coat thickness and application losses affect actual consumption. The calculator does not automatically deduct the thinner proportion and does not include thinner. Select 1–6 coats for the stage being calculated. Follow the product-specific thinning, coat-count and drying instructions; six is not a universal limit for the complete varnish system. The estimate is based on the coverage stated in the store’s product information. Wood absorbency affects consumption.
View product informationFree collection from our store · 14-day right of withdrawal – see terms
Le Tonkinois Öljylakka, also known as Vernis, is an oil-based clear varnish for wood indoors and outdoors. It highlights the grain and warm tone of the wood and forms a glossy varnish surface. On a boat, applications include interior woodwork, railings and other surfaces to be varnished above the waterline. The product does not replace repairs to structural damage in wood.
A good result starts with a clean, dry and evenly sanded substrate. Remove dirt, grease and dust, and check the condition and compatibility of the old coating. The wood's natural colour and any remaining previous treatments affect the result. Make a test piece if the wood species, previous treatment or desired colour effect is uncertain.
The varnish is supplied ready to use. Stir before use and apply thin coats with a brush or suitable roller. Do not add thinner for normal brush or roller work. For spraying, the manufacturer permits up to 10 % LeT Ohenneif needed. Choose the coat count according to the exposure; one thick coat is not equivalent to several thin ones.
Apply only one coat per day and allow the previous coat to dry thoroughly. Cold conditions, high humidity and poor ventilation extend drying time. For a more matt finish, add Gelomat only to the final coat according to its own dosage instructions. For maintenance, clean the surface, remove loose varnish and repair worn areas before a new treatment.
Detailed work instructions, the manufacturer’s product data sheets and downloadable materials are available on the Additional Information tab.
- Prepare the wood. Clean, degrease and sand evenly; recommended grit 180–240. Remove dust. Maximum wood moisture 15 %; the substrate must be dry and sound.
- Plan the coats. Choose a varnish system suitable for the application and exposure. Check compatibility with the old coating and make a test piece if necessary.
- Stir and apply thinly. Ready to use; normally no thinning for brush or roller application. Do not work below +12 °C. For spraying, maximum 10 % LeT Ohenne.
- Wait before the next coat. At +20 °C, touch dry in approximately 6–8 h; wait approximately 24 h before recoating. Only one coat per day, longer if the surface is not dry.
- Finish and maintain. If needed, use Gelomat only in the final coat. Initially subject the finish to light use and check drying. Provide ventilation and follow the protective instructions on the package. Oily cloths can heat up and ignite spontaneously: do not leave them crumpled up; handle them according to the package and safety data sheet.
Download the detailed work instructions and the manufacturer’s technical documents from the Additional Information tab.
Venemaalit.fi work instructions
Open work instructions (PDF) · FI / SV / EN ↗| Type | Oil-based clear varnish |
|---|---|
| Use | Wood, indoors and outdoors |
| Coverage | Approximately 20 m²/l/coat; absorbency affects coverage |
| Minimum temperature | +12 °C |
| Drying at +20 °C | Approximately 6–8 h; recoating interval approximately 24 h |
| Thinning | Normally none; maximum 10 % LeT Ohenne for spraying |
Downloadable materials
Venemaalit.fi work instructions
Open work instructions (PDF) · FI / SV / EN ↗
Let Oil Varnish
0.25 LGet notified when this item is back in stock
- 5 stars: 1 (100%)
- 4 stars: 0 (0%)
- 3 stars: 0 (0%)
- 2 stars: 0 (0%)
- 1 star: 0 (0%)
Helppo lakata ja veneestä tuli todella kiiltävä.
Hei Petri, kiitos arvostelustasi!
Mukava kuulla, että LeT Öljylakka oli helppo levittää ja veneeseen tuli todella kiiltävä pinta. Hieno lopputulos kuulostaa juuri siltä, mitä öljylakalta haetaan.
Ystävällisin terveisin,
venemaalit.fi