Hempel Pre-Clean 1L

SURFACE PREPARATION: Remove loose dirt by rinsing the surface with fresh water.

APPLICATION:Shake well before use. Thin with: Fresh water: 1-20 parts fresh water to 1 part product. For more demanding tasks, use minimal thinning.

Apply the product with a sponge, soft brush, pad, or by spraying at the lowest possible pressure. After 5-10 minutes, rinse thoroughly with water until all residue is removed. Allow the surface to dry. If the product leaves a white film, it can be removed with warm water.

Do not use on surfaces sensitive to alkalis, such as aluminum or plastic windows. Do not expose to freezing. The surface temperature must be above: 5°C.

NEXT COAT:For a high gloss finish,use: HEMPEL’S CUSTOM MARINE POLISH 67444. Finish with:HEMPEL’S WAX 69033orHEMPEL’S WAX TecCel 69034.

Cleaning

– Rinse the surface with fresh water.

Application

Notes

– Thin with fresh water.
– Apply with a sponge, brush, or low-pressure hose. For
more demanding tasks, use minimal thinning.
– Ensure a 1:20 dilution for aluminum.
– Rinse thoroughly with water until all residue is removed.

Safety Data Sheet: Hempel Pre-Clean

Product Data Sheet: Hempel Pre-Clean

Product description: Hempel's Pre-Clean is an effective cleaner and degreaser.

Recommended use: It is suitable for pre-cleaning gelcoat, painted and varnished surfaces and for removing fuel, oil, grease, wax and silicone. Used before painting and for deep cleaning.

Flash point: 78°C [172°F]

VOC content: 30g/L

Handling
Handle with care. Refer to all warnings and safety texts on the packaging and paint containers before and during use and comply with local and national regulations during use. Always refer to the Hempel safety data sheet in addition to the product data sheet for more detailed product information.

Product code: 67602

Standard shade / code: – 98880

Dry matter content: 17 ± 2%

Specific gravity: 1 kg/L [9 lb/US gal]

Shelf life

Shelf life from date of manufacture when stored in original, unopened containers. The product quality must be checked after this. Always check the label for the best before date or use by date.

Storage conditions

• The temperature must not fall below 0°C [32°F] during transport and storage.