Handle with care.
Read all warnings, safety texts, and HEMPEL Safety Data Sheets before use and comply with local and national regulations during use.
Clean the surface of dirt and grease using Hempel's Pre-Cleanor Hempel's Boat Shampooand rinse with fresh water.
Allow the surface to dry. Surfaces in good condition: Polish: Hempel’s Custom Marine Polish.
Deteriorated surfaces:Use: Hempel’s Rubbing Liquidto restore gloss and color to gelcoat and painted surfaces, and Hempel’s Custom Marine Polish.
Apply: Hempel’s Wax.
Shake well before use.
Apply a thin layer of the product with clean and soft rags.
Treat only small areas at a time.
Allow the surface to dry.
Polish with a clean and soft cloth or a polishing machine for more effective performance.
Change clean cloths regularly.
Use a new, clean polishing pad when using a polishing machine.
Maintain gloss by applying additional layers when fading is observed.
Allow newly painted surfaces to dry/cure for at least 90 days before using the product.
If repainting is needed later, all wax residues must be removed using: Hempel’s Pre-Clean.
Rinse the surface with fresh water.
Do not expose to freezing.
Do not treat in direct sunlight.
Surface temperature must be above: 5°C/41°F.
None.
Gloss is maintained by applying additional layers when fading is observed.
Surface preparation
Cleaning
– Clean with Hempel’s Pre-Cleanor Hempel’s Boat Shampoo.
Maintenance and Repair
– Deteriorated surfaces: Restore gloss and color with Hempel’s Rubbing Liquid.
Application
Thinner
No thinning
Cleaner
No cleaning
Application method
Shake well before use. Do not treat in direct sunlight.
Painting conditions
– Apply only to dry and clean surfaces with a temperature of at least 3°C [5°F] above the dew point. This prevents condensation.
Notes
– Apply the product with a clean, dry, and soft cloth.
– Treat only small areas at a time. Allow the surface to dry for 5-10 minutes.
– Polish with a clean and soft cloth or a polishing machine to achieve a glossy finish.
– Change clean cloths regularly.
Drying and recoating
Product compatibility
– Previous paint layer: Recommended products are: Hempel’s Rubbing Liquid, Hempel’s Custom Marine Polish
Drying time
Allow newly painted surfaces to dry/cure for at least 90 days before using the product.
Other notes
– If repainting is needed later, all wax residues must be removed using Hempel’s Pre-Clean.
