Hempel

Hempel Sealer 599 0.75L

HEMPEL’S SEALER 05991
Hempel's Sealer 599 – A 2-component, low-viscosity epoxy solution with excellent penetration.
Used on wood and other porous surfaces as a first coat before painting.
Not suitable for use on gelcoat surfaces.
Used both above and below the waterline.

Sale price 32,20 € Regular price 46,00 €
30% off
Tax included. Shipping from €6.95. Final cost at checkout.

Available to order – delivery in 2–6 business days

Product colour: clear / colourless

Hempel Sealer 599 0.75L · colour samples for this product.

  • Clear / colourless

The checkerboard indicates transparency, not the product colour. The surface being treated affects the final result.

Calculate how much you need

Hempel Sealer 599 0.75L

Enter the area to see how much paint and how many tins you need.

Calculation: 10.0 m²/l/coat. Actual consumption may be higher. Select the number of coats for your project: one coat is usually not enough for a complete treatment of a new surface. Other products in the system are not included in the calculation.

View product information
Payment methods
  • Klarna
  • Mastercard
  • MobilePay
  • Visa

Free collection from our store · 14-day right of withdrawal – see terms

Dispatch usually in 2–6 business days
Free pickup from store
Questions? Customer service will help you

For impregnating thoroughly cleaned concrete surfaces before painting with pigmented paints.
The lacquer should be applied until the surface is saturated.
The surface should not be "shiny" after treatment.
Also suitable for insulating thermally sprayed metal coatings.
HEMPADUR SEALER 05993 is used in cold/temperate climates.

Previous paint: -

Next paint: Hempel's Light Primer, Hempel's Underwater Primer or Hempel's Varnishes

Warning word: Danger

Hazard statements:
H226: Flammable liquid and vapour.
H315: Causes skin irritation.
H317: May cause an allergic skin reaction.
H318: Causes serious eye damage.
H332: Harmful if inhaled.
H411: Toxic to aquatic life with long lasting effects.

Precautionary statements:
Avoid breathing vapours, spray or mist. Wear protective gloves/protective clothing/
eye protection/face protection. Keep away from heat, hot surfaces, sparks, open flames and other
ignition sources. No smoking.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present
and easy to do. Continue rinsing. Immediately call a POISON CENTER or doctor.
Store in a cool place.

Concrete:Remove mold release agents and other contaminants by emulsifier washing followed by high-pressure fresh water washing. Remove laitance and loose material and prepare the surface to be hard, rough, and uniform, preferably by abrasive blasting or possibly by other mechanical treatment or acid etching. Seal the surface with a suitable pore filler in accordance with the appropriate painting specification.

Thermal Sprayed Metal Coatings:Must be applied soon after application of the metal layer. Permissible to prevent possible contamination of the porous coating.

Mixing ratio:4:1 by volume

Pot life:8 hours

Venemaalit.fi work instructions

Open work instructions (PDF) · FI / SV / EN ↗

Safety Data Sheet: Hempel Sealer Base, Hempel Curing Agent

Product Data Sheet: Hempel Sealer

Product description
Hempel's Sealer is a two-component low-viscosity epoxy pore sealer with good penetration properties. Ideal for porous surfaces.

Recommended use
Can be used on wood and plywood surfaces. Suitable for saturating fiberglass laminate after gelcoat has been removed (osmosis damage repair). Intended for interior and exterior use, both above and below the waterline.

Flashpoint
26°C [79°F]

VOC content, mixed product
606g/L

Handling
Handle with care. Read all warning and safety texts on the packaging and paint containers before and during use, and observe local and national regulations during use. Always refer to Hempel's Safety Data Sheet in addition to the Product Data Sheet for more detailed product information.

Product code
05991

Product components
Base 05999 Curing agent 95040

Standard shade / code
Transparent 00000

Gloss
Matt

Dry matter content
29 ± 2%

Specific gravity
0.9 kg/L [8 lb/US gal]

Dry film thickness, reference
30 microns [1.2 mils]

Venemaalit.fi work instructions

Open work instructions (PDF) · FI / SV / EN ↗

Recently Viewed Products