Hempel Light Primer Product Description

Coverage: 8.2m²/L
Thinner:
Thinner 845 for brushing
Thinner 845 for spraying
 

Previous paint layer: Hempel’s Sealer (for plywood) No need for other surfaces.

Next paint layer: Recommended products are: Hempel’s Underwater Primer, Hempel’s Silic One Tiecoat ; Hempel’s Polygloss, Hempel’s Profair, Hempel’s Epoxy Filler, Hempel’s Non- Slip Deck Coating, Hempel’s High Protect II

HEMPEL MARINE PAINT LIGHT PRIMER 45551 is a two-component, thick film type, solvent-based epoxy primer and epoxy intermediate coat. 
Suitable for preventing and repairing osmosis blisters in fiberglass. 
Protects against general corrosion.

Can be used on fiberglass, steel, aluminum and plywood surfaces.
Intended for interior and exterior use above and below the waterline.
Also suitable for preventing and repairing osmosis blisters in fiberglass-reinforced polyester.

Signal word: Danger

Hazard statements:
H226 – Flammable liquid and vapor.
H318 – Causes serious eye damage.
H332 – Harmful if inhaled.
H315 – Causes skin irritation.
H317 – May cause an allergic skin reaction.
H411 – Toxic to aquatic life with long lasting effects.
H412 – Harmful to aquatic life with long lasting effects.

Precautionary statements:
Avoid breathing vapor, spray or mist. Wear protective gloves/protective clothing/
eye protection/face protection. Keep away from heat, hot surfaces, sparks, open flames and other
ignition sources. No smoking.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact
lenses, if present and easy to do. Continue rinsing. Immediately call a
POISON CENTER or doctor.
Store in a cool place.

Hazardous ingredients:
medium molecular weight epoxy resin
Butan-1-ol
xylene
Polymer containing C18 unsaturated fatty acid dimers, containing tall oil
fatty acids and triethylenetetramine
3,6-Diazaoctane-1,8-diamine; Triethylenetetramine

Additional labeling:
Contains epoxy resins. May produce an allergic reaction.