Hempel

Hempel Underwater Primer

Connect priming and antifouling with the correct intermediate coat. Hempel Underwater Primer is a fast-drying underwater primer for fibreglass, wood and steel. Depending on the system, it is used to isolate old antifouling or as a tiecoat between epoxy priming and antifouling. The work required depends on the existing surface: a sound epoxy base does not need the same treatment as a new porous substrate.

Sale price 21,00 € Regular price 30,00 €
30% off
Tax included. Shipping from €6.95. Final cost at checkout.

Varastossa

Size: 0.75L
Colour: Grey
View product colour samples

Hempel Underwater Primer · colour samples for this product.

Choose a colour by clicking a sample or using the colour selector above. Screen colours are indicative; check the colour before painting.

Calculate how much you need

Hempel Underwater Primer

Enter the area to see how much paint and how many tins you need.

Calculation: 7.8 m²/l/coat. Actual consumption may be higher. Select the number of coats for your project: one coat is usually not enough for a complete treatment of a new surface. Other products in the system are not included in the calculation.

View product information
Payment methods
  • Klarna
  • Mastercard
  • MobilePay
  • Visa

Free collection from our store · 14-day right of withdrawal – see terms

Usually dispatched within 1–3 business days
Free pickup from store
Questions? Customer service will help you

Hempel Underwater Primer helps form a functional connection between the boat's priming and the chosen antifouling paint. This one-component primer containing aluminium flakes is suitable for fibreglass, wood and steel below the waterline, including keels. It can be used to isolate old antifouling, provide adhesion to an epoxy-primed surface or serve as the actual primer appropriate to the substrate.

The work sequence depends on the condition of the bottom. According to the manufacturer, an epoxy-primed surface requires one Underwater Primer tiecoat. One full coat is also used for maintenance of a previously treated, correctly prepared surface. A new porous surface requires its own first priming coat followed by a full protective treatment. Impregnation of wood and removal of rust from steel take place before this stage.

Underwater Primer does not replace removal of poorly adhering paint layers. Wash off grease and contaminants, sand the necessary surfaces and level repairs before application. When working over fresh two-component epoxy, also observe its own adhesion window: Underwater Primer's drying table alone does not indicate the correct time for painting over epoxy.

Choose the antifouling before priming and check its compatibility and overcoating interval. Underwater Primer alone is not a finished antifouling coating. When calculating paint quantities, distinguish the coats on a new porous substrate from the maintenance coat on a sound existing primer.

Detailed work instructions, the manufacturer’s product data sheets and downloadable materials are available on the Additional Information tab.

  1. Prepare the bottom. Remove grease, for example with Pre-Clean, rinse and dry. Sand the existing compatible surface and remove loose paint. Impregnate new wood with a suitable product; remove salts, rust and loose material from steel and apply the priming required for the substrate.
  2. Select the coating schedule. Apply 1 tiecoat to an epoxy-primed surface. Apply 1 full unthinned coat to a prepared, previously treated surface. For a new porous surface, the PDS specifies a thinned first coat, maximum 20 %, followed by 2 full unthinned coats.
  3. Stir and apply. Stir thoroughly. Thinning and tool cleaning: Thinner 811. For normal brush, roller and paint pad application, thin by no more than 5 %; the first priming coat on a porous substrate is the exception described above. Reference film: 50 µm dry / 128 µm wet, coverage 7,8 m²/l.
  4. Keep the surface dry. Surface at least 3 °C above the dew point, RH below 85 %. Maintain ventilation and prevent condensation during drying.
  5. Allow the correct interval. Underwater Primer → Underwater Primer: at least 2½ h at +20 °C and at least 4½ h at +10 °C. The table gives no maximum interval, but a contaminated surface must be cleaned and abraded. Touch dry after 3 h / 6 h respectively.
  6. Apply antifouling. Follow the chosen antifouling's own instructions for overcoating and launching. Check Light Primer's instructions for the application interval over fresh Light Primer. Follow the protective measures on the package and in the SDS.

Download the detailed work instructions and the manufacturer’s technical documents from the Additional Information tab.

Venemaalit.fi work instructions

Open work instructions (PDF) · FI / SV / EN ↗
Type1K underwater primer, sealer and tiecoat
SubstratesFibreglass, wood and steel according to the system
Thinner / cleaningThinner 811
Reference film / coverage50 µm dry / 128 µm wet; 7,8 m²/l
Recoating interval with the same product+20 °C at least 2½ h; +10 °C at least 4½ h
Putting into serviceAccording to the chosen antifouling and complete system

Downloadable materials

Manufacturer’s product data sheet, Finnish (PDF)

Safety

The following information was checked against the Finland-specific safety data sheets linked above. Also check the labelling on your own package and all protective measures specified in the SDS.

Underwater Primer 19000: Danger.

  • H226 – Flammable liquid and vapour.
  • H317 – May cause an allergic skin reaction.
  • H336 – May cause drowsiness or dizziness.
  • EUH441 – Strongly accumulates in the environment and living organisms including humans.

Venemaalit.fi work instructions

Open work instructions (PDF) · FI / SV / EN ↗

Recently Viewed Products