Stir well before use.
Surface preparation:
Always ensure that all surfaces are clean, oil-free, and dry. Clean the surface and remove any oil and grease, then sand the surface with dry sandpaper. Carefully remove dust with fresh water.
Unpainted surface:
Fiberglass:Sand the surface and remove dust.
New wood:Sand the surface and remove dust. Seal the dry and clean surface with a suitable wood pore sealer.
Steel:Remove salt and other contaminants by cleaning with fresh water. Remove all rust and loose material by blast cleaning or wire brushing. Remove dust.
Priming:
Apply the specified Hempel epoxy primer.
Previously treated surface:
Sand, clean and dry the surface.
Painting:
Stir the product well before use. Spot-prime bare areas to full film thickness.
Previously treated surface:
When used as a sealer or tie coat, apply 1 coat of the product.
Previously primed surface:
When the previously applied epoxy primer is still tacky, apply 1 coat of the product as a tie coat.
Wood:
First, apply a coat of the product thinned with the recommended thinnerHempel Thinner 811: Max. 20%. Finally, apply 2 coats of the product. If necessary, add thinner max. 5%. Overcoat with the selected antifouling paint.
Previous paint layer: Hempel’s Sealer(for new wood), Hempel’s Light Primer
Storage life: 5 years from the date on the lid
