Hempel’s High Protect 35651 – 2-component solvent-free epoxy paint, suitable for the prevention and repair of osmosis in fiberglass.
The surface must be roughened by sanding before applying the paint.
Can be used instead of Hempel’s Light Primer in areas where solvent emissions may be an issue.
During application, the stated drying, curing, and recoating intervals must be observed.
Different coats should be painted in different shades. This makes it easier to see that enough paint has been applied.
Cleaning of tools: Hempel’s Thinner 845.
Hempel
Hempel High Protect II
Sale price
94,50 €
Regular price
135,00 €
30% off
Tax included.
Shipping from €6.95. Final cost at checkout.
Varastossa
View product colour samples+×
Hempel High Protect II · colour samples for this product.
Choose a colour by clicking a sample or using the colour selector above. Screen colours are indicative; check the colour before painting.
Calculate how much you need +
Hempel High Protect II
Enter the area to see how much paint and how many tins you need.
Calculation: 6.6 m²/l/coat. Actual consumption may be higher. Select the number of coats for your project: one coat is usually not enough for a complete treatment of a new surface. Other products in the system are not included in the calculation.
View product information
Payment methods
Free collection from our store · 14-day right of withdrawal – see terms
Usually dispatched within 1–3 business days
Free pickup from store
Questions? Customer service will help you
Description
Instructions for Use
Additional Information
Coverage: 8m2/L
Thinner:
Thinner 845
Hempel's High Protect II 35780 is a two-component, solvent-free epoxy paint suitable for osmosis protection and repair. The product is easy to apply and highly resistant to environmental conditions. It forms a hard, durable, and water-repellent surface.
The product can also be used as a primer below the waterline for boats made of fiberglass or steel. It is suitable for preventing and repairing osmosis blisters in fiberglass, both above and below the waterline.
Previous paint: -
Next paint: Hempel Underwater Primer, Hempel Light Primer
Signal word: Danger
Hazard statements:
H302 - Harmful if swallowed.
H314 - Causes severe skin burns and eye damage.
H315 - Causes skin irritation.
H317 - May cause an allergic skin reaction.
H319 - Causes serious eye irritation.
H411 - Toxic to aquatic life with long lasting effects.
Precautionary statements:
Avoid breathing vapours, spray or mists. Wear protective gloves/protective clothing/
eye protection/face protection. Keep away from heat, hot surfaces, sparks, open flames and other
ignition sources. No smoking.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if
present and easy to do. Continue rinsing. Immediately call a
POISON CENTER or doctor.
Store in a cool place.
Pre-treatment:
Always ensure that all surfaces are clean, oil-free and dry. Clean the surface of dirt and remove grease and oil with a suitable detergent.
Sand the surface with dry sandpaper.
Carefully remove dust with fresh water.
Painting:
Fiberglass:
Ensure that new gelcoat surfaces have been thoroughly cleaned and that old paint layers have been removed from previously coated surfaces.
Apply 1 coat of the product. (150 microns). Allow to dry.
Level and sand the surfaces if necessary.
Apply 1 coat of the product. (150 microns). Total: 300 microns.
Steel:
Apply the product in 3 dry film layers of 150 microns each. Total: 450 microns.
Repair:
Remove the gelcoat surface and allow the hull to dry. Apply 1 coat of the product. (150 microns).
Allow to dry.
Level and sand the surfaces if necessary.
Apply the product in 3 dry film layers of 150 microns each. Total: 600 microns.
Treat the surface with HEMPEL's primer/adhesion primer and selected topcoat/antifouling paint according to instructions. The next single-component primer is applied while the epoxy surface is still tacky.
Mixing ratio:
3 : 2 by volume.
Mix the base and add the hardener. Mix well. After mixing the paint, wait several minutes for air bubbles to disappear.
Pot life: 45 minutes
Shelf life: 3 years from the date on the lid
Venemaalit.fi work instructions
Open work instructions (PDF) · FI / SV / EN ↗Product Description
Hempel’s High Protect II is a two-component, solvent-free epoxy paint suitable for osmosis protection and repair. The product is easy to apply and highly resistant to environmental conditions. It forms a hard, durable, and water-repellent surface.
Recommended use
The product can also be used as a primer for fiberglass or steel boats below the waterline. The product is suitable for preventing and repairing osmosis blisters caused by fiberglass, both above and below the waterline.
Flashpoint
129°C [264°F]
VOC content, mixed product
34g/L
Handling
Handle with care. Review all warnings and safety texts on the packaging and paint containers before and during use, and comply with local and national regulations during use. Always refer to Hempel's Safety Data Sheet for more detailed product information in addition to the product data sheet.
For professional use only.
Product code
35780
Product components
Base 35789 Curing agent 95078
Standard shade* / code
Grey 13700
Gloss
High gloss
Solid content
99 ± 2%
Specific gravity
1.3 kg/L [11 lb/US gal]
Dry film thickness, reference
150 microns [5.9 mils]
Safety Data Sheet: Hempel’s High Protect II Base, Hempel Curing Agent
Product Data Sheet: Hempel High Protect II
Venemaalit.fi work instructions
Open work instructions (PDF) · FI / SV / EN ↗
Hempel High Protect II
2.5L / GreyGet notified when this item is back in stock
1 / 1
Press & drag to view