Hempel

Hempel Hard Racing Xtra

Want a smooth antifouling surface that withstands mechanical wear on your boat's bottom? Hempel Hard Racing Xtra is a hard antifouling paint for motorboats and racing sailing boats in seawater. It is suitable for correctly primed fibreglass, wood, plywood and steel, and for maintenance over compatible existing antifouling. Not for aluminium or inland waters.

Sale price 53,20 € Regular price 76,00 €
30% off
Tax included. Shipping from €6.95. Final cost at checkout.

Varastossa

Size: 0.75L
Colour: Red
View product colour samples

Hempel Hard Racing Xtra · colour samples for this product.

Upper sample: dry, before launching. Lower sample: wet, immersed.

Choose a colour by clicking a sample or using the colour selector above. Screen colours are indicative; check the colour before painting.

Calculate how much you need

Hempel Hard Racing Xtra

Enter the area to see how much paint and how many tins you need.

Calculation: 13.0 m²/l/coat. Actual consumption may be higher. Select the number of coats for your project: one coat is usually not enough for a complete treatment of a new surface. Other products in the system are not included in the calculation.

View product information
Payment methods
  • Klarna
  • Mastercard
  • MobilePay
  • Visa

Free collection from our store · 14-day right of withdrawal – see terms

Usually dispatched within 1–3 business days
Free pickup from store
Questions? Customer service will help you

Hempel Hard Racing Xtra is a hard antifouling paint for the underwater hull when the aim is a smooth, wear-resistant surface and protection against fouling during the boating season. It is intended especially for motorboats and racing sailing boats. The mechanical strength of the hard paint film is useful where the bottom surface needs durability.

The product can be used on fibreglass, wood, plywood and steel boats over suitable priming. A bare substrate first requires a primer system appropriate to its material. On a fibreglass bottom, for example, the sequence includes Hempel Light Primer, Hempel Underwater Primer followed by Hard Racing Xtra. The primers protect the substrate and ensure topcoat adhesion; antifouling does not replace them.

For maintenance painting, the entire priming system does not need replacing if the existing system is sound, firmly adhering and compatible. Wash and wet-sand existing hard antifouling. Remove loose paint and prime bare areas before topcoating. Establish the compatibility of soft or unknown existing coatings and whether a tiecoat is needed before starting.

Choose the colour and pack size according to the bottom area and the application quantity permitted on the package. The paint colour may differ when dry and in water. Calculate consumption using the specified film thickness and allow for paint left on tools. If you need thinner, check that the product codes of your paint and thinner are compatible.

The Hard Racing Xtra colours sold in this store, including Dove White, are not suitable for aluminium or other light metals. In Finland, biocidal antifouling paint is used only in seawater areas according to the approved package instructions. Use antifouling paints safely. Always read the label and product information before use.

Detailed work instructions, the manufacturer’s product data sheets and downloadable materials are available on the Additional Information tab.

  1. Choose a suitable starting surface. Use only for approved use in seawater on fibreglass, wood, plywood or steel. Do not use the store's colours on aluminium, light metals or directly on a silicone coating. Check compatibility with the existing paint.
  2. Wash and prepare. Remove fouling, salts, dirt and loose paint by controlled freshwater washing in a place where wash water is collected and treated. Wet-sand sound existing hard antifouling. Do not dry-sand. Rinse and allow to dry. Remove poorly adhering paint; a tiecoat cannot repair a flaking substrate.
  3. Prime the necessary areas. Bare fibreglass: Light Primer → Underwater Primer → Hard Racing Xtra. Prime bare repair areas too. Select preparation and priming for wood, plywood and steel according to the substrate. Follow each primer's own coat counts and overcoating intervals.
  4. Stir and check the thinner. Stir thoroughly down to the bottom and during application. The product is one-component: do not add curing agent. Preferably use unthinned. The PDS specifies Hempel Thinner 08080, maximum 5 percent by volume. Do not assume 808/08081 is the same thinning product: check the instructions for your batch. The PDS permits 808/08081 for tool cleaning.
  5. Apply an even film. Use a brush, roller or paint pad. The PDS seasonal quantity is one coat with a 40 µm dry film, corresponding to approximately 77 µm wet film and a theoretical coverage of 13 m²/l. Follow the application quantity permitted on the package. Consumers must not spray-apply the product. Paint only a clean, dry surface: relative humidity below 85 %, surface at least 3 °C above the dew point. Provide ventilation.
  6. Observe temperature-dependent intervals. The minimum interval for recoating Hard Racing Xtra with itself is 8 h at +10 °C, 4 h at +20 °C and 3 h at +30 °C; no maximum interval is stated. Touch dry after 8 h, 4 h and 2 h respectively. Clean a contaminated surface before continuing. The coating interval is not the launching time or permission to exceed the seasonal application quantity.
  7. Launch at the correct time. The PDS specifies a minimum launching time of 24 h at +20 °C and a maximum of 6 months. A minimum launching time at +10 °C is not given: confirm it before starting. Do not infer it from touch dryness or the coating interval.
  8. Protect yourself and the environment. Use chemical-resistant protective gloves, protective clothing and eye/face protection, and the respiratory protection required by the SDS. Protect the ground and collect paint waste, sanding waste and wash water. Do not release into soil or water. No open flames, sparks or smoking. Read the selected colour's SDS and package label. If anything is unclear: info@venemaalit.fi.

Download the detailed work instructions and the manufacturer’s technical documents from the Additional Information tab.

Venemaalit.fi work instructions

Open work instructions (PDF) · FI / SV / EN ↗
Product typeOne-component hard biocidal antifouling paint
Product series7666C; select the safety data sheet according to the colour code
SubstratesPrimed fibreglass, wood, plywood and steel
RestrictionsNot for aluminium or light metals, inland waters or fish farming equipment
FinishSemi-matt
CoverageTheoretical coverage 13 m²/l at 40 µm dry film thickness
Film thicknessDry 40 µm / wet 77 µm
Seasonal application quantityPDS: 1 × 40 µm; the approved package instructions govern
ThinningPDS: Hempel Thinner 08080, maximum 5 % by volume
Tool cleaningPDS: Hempel Thinner 08080 or Thinner 808 / 08081
Application conditionsDry, clean surface; at least 3 °C above the dew point; RH below 85 %
Recoating with the same product+10 °C: min. 8 h / +20 °C: min. 4 h / +30 °C: min. 3 h; no maximum interval
LaunchingAt least 24 h at +20 °C, within 6 months; confirm the time at other temperatures

Downloadable materials

Select the safety data sheet for your colour. Dove White 10160 belongs to the 7666C series and has a separate safety data sheet. Hazard and composition information may differ between colours. Check the product code on the package.

Venemaalit.fi work instructions

Open work instructions (PDF) · FI / SV / EN ↗

Recently Viewed Products