Manufacturing date of products in stock: 0.75L – 05.2022
Safety Data Sheet: Hempel Silic One Tiecoat
Product Data Sheet: Hempel Silic One Tiecoat
Removing old paint and antifouling
Removing old paint and antifouling is easy with Hempel’s Paint
Stripper, an effective solvent-based paint stripper. It can be used on most painted and varnished surfaces.
- You can estimate the time required for the job by first trying it on a small area.
- Apply Hempel’s Paint Strippergenerously to a dry surface with a brush or roller.
- Be careful when using the product on plastic surfaces (it can damage some thermoplastics, e.g. ABS).
- Do not work on too large an area at a time.
- After application, wait 15 – 30 minutes for the paint film to dissolve or detach. (Antifouling paints, alkyd paints and varnishes react fastest, while silicone and epoxy take longer to dissolve.)
- It is recommended to cover the treated area with aluminum foil to prevent the active ingredients from evaporating too quickly.
- Scrape off the old paint and then clean the surface with hot water and Hempel’s Boat Shampoo.
- If the paint film is old or very thick, it may require repeated treatment to remove it.
Cleaning and degreasing
Thorough pre-treatment is a prerequisite for a successful painting job. The surface to be painted must be clean and grease-free.
Cleaning
Hempel’s Pre-Cleanis an effective detergent for pre-cleaning gelcoat and painted surfaces to remove fuel, oil, grease, wax and silicone. Used before painting and for deep cleaning. • For general cleaning, use 1 part Hempel’s Pre-Cleanto 20 parts water, and for more demanding cleaning, use a ratio of 1:10. • For alkaline-sensitive surfaces, such as aluminum, dilute the product with water in a ratio of 1:20.
• Do not use on untreated wood that may absorb water.
Hempel’s Pre-Cleanis also suitable for cleaning hardened paint from brushes.DegreasingRemove surface dirt, especially waxes or silicone, from new gelcoat surfaces using Hempel’s Degreaser. It cannot be used with conventional one-component paint systems, as Hempel’s Degreasersolvents can damage the paint film. • Work in a well-ventilated area and use a clean, absorbent and lint-free cloth soaked in
Hempel’s Degreaser. • Clean an area of approximately 1 m² at a time by moving the cloth lengthwise. Change the cloth before treating the next section. Use protective gloves and safety glasses. • Wipe off excess
Hempel’s Degreaserfrom the surface with a new dry cloth.
Product Description Hempel’s Silic One Tiecoat adhesion primer is a silicone-based, moisture-curing adhesion primer for Hempel’s Silic One. – It ensures adhesion between Hempel’s Light Primer or Hempel’s Silic Seal – primer and Hempel’s Silic One.
Recommended useThe product is used to prevent the adhesion of marine growth on boats made of fiberglass, steel, and aluminum. Used below the waterline.
Flash point 33°C [91°F]
VOC content 232g/L
HandlingHandle with care. Refer to all warning and safety texts on the packaging and paint containers before and during use, and comply with local and national regulations during use. Always refer to Hempel’s Safety Data Sheet for more detailed product information in addition to the product data sheet.
Product code27450
Standard shade / codeCream 23410
GlossSemi-gloss
