Hempel SILIC ONE Remover 99450 5L

SURFACE PRE-TREATMENT:

Pre-treatment: Before applying the product, it is recommended to treat a small test area and record the duration of the required treatment. Do not treat in direct sunlight.

PRODUCT APPLICATION:

Painting: Cover other areas, including anodes, before use. Apply the product generously. Do not treat excessively large areas at once. Cover the treated area with a plastic film to prevent active solvents from evaporating too quickly. Allow to act for 6 hours until the coating dissolves or softens. Use with caution on fiberglass and rubber seals. Scrape off old paint and wash with hot water and boat shampoo. Old or thick layers of paint may require multiple treatments. Residues can be sanded.
 

PAINTING CONDITIONS:

Application temperature: 10°C/50°F.
Do not use heat guns.
Do not use in strong sunlight, on hot surfaces, or in humid conditions. Protect from flames and hot surfaces.

RECOMMENDED CLEANER:

HEMPEL'S BOAT SHAMPOO 67284

Storage conditions:

Exposure to air and temperature fluctuations should be avoided. Avoid direct sunlight. Store tightly sealed. Store at temperatures: 5°C/41°F - 35°C/95°F.

Recoating:

- Not applicable

Warning: Danger

Hazard statements:
H290 - May be corrosive to metals.
H314 - Causes severe skin burns and eye damage. 
H412 - Harmful to aquatic life with long lasting effects.

Precautionary statements:
Avoid breathing vapours, spray or mists. Wear protective gloves/protective clothing/
eye protection/face protection. Keep away from heat, hot surfaces, sparks, open flames and other
ignition sources. No smoking.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present
and easy to do. Continue rinsing. Immediately call a POISON CENTER or doctor.
Store in a cool place.