Hempel

Hempel Mille Xtra

Protect your boat's bottom with a self-polishing antifouling paint that renews itself during use. Hempel Mille Xtra is suitable for correctly primed fibreglass, wood, plywood and steel. For maintenance painting, clean the sound bottom and repair damage before applying a new coat. The white 7166W version has its own product data sheet, so always check your selected colour and package.

Sale price 60,20 € Regular price 86,00 €
30% off
Tax included. Shipping from €6.95. Final cost at checkout.

Varastossa

Size: 0.75L
Colour: Red
View product colour samples

Hempel Mille Xtra · colour samples for this product.

Upper sample: dry, before launching. Lower sample: wet, immersed.

Choose a colour by clicking a sample or using the colour selector above. Screen colours are indicative; check the colour before painting.

Calculate how much you need

Hempel Mille Xtra

Enter the area to see how much paint and how many tins you need.

Calculation: 15.0 m²/l/coat. Actual consumption may be higher. Select the number of coats for your project: one coat is usually not enough for a complete treatment of a new surface. Other products in the system are not included in the calculation.

View product information
Payment methods
  • Klarna
  • Mastercard
  • MobilePay
  • Visa

Free collection from our store · 14-day right of withdrawal – see terms

Usually dispatched within 1–3 business days
Free pickup from store
Questions? Customer service will help you

Hempel Mille Xtra is a self-polishing antifouling for seasonal protection of the boat's underwater hull. It is suitable for cold and moderately warm waters and for correctly primed fibreglass, wood, plywood and steel. The semi-matt paint film is designed to renew itself during use. This is different from a hard, cleanable biocide-free topcoat.

Begin maintenance painting by inspecting the existing bottom. Firmly adhering conventional or self-polishing antifouling does not need to be completely removed just for a new maintenance coat. However, wash off loose material, fouling and contaminants. Prepare existing hard antifouling by wet-sanding; remove paint that is extensively in poor condition and rebuild the priming system.

A bare hull requires priming appropriate to the substrate and a compatible tiecoat. The manufacturer specifies Light Primerand Underwater Primer. The tiecoat timing is determined by that primer's instructions; Mille Xtra's own recoating interval does not replace it. Plan paint quantities using the surface area and required dry film thickness, and keep thinning to a minimum.

Use product code 7166C information for other colours and the separate 7166W data sheet for the white version. Other colours must not be used on aluminium. Any use of the white version on aluminium requires the separate epoxy system specified in its data sheet. Use antifouling safely and check your package's approved use, label and restrictions before painting.

Detailed work instructions, the manufacturer’s product data sheets and downloadable materials are available on the Additional Information tab.

  1. Wash and inspect. Remove salts, fouling and loose material with high-pressure fresh water. Wet-sand existing hard antifouling and remove dust. Remove layers that are extensively in poor condition; do not seal loose paint under a new coating.
  2. Prime the necessary areas. New bare substrate: a Light Primer system suitable for the material, followed by Underwater Primer within the manufacturer's adhesion window. Repair local defects and apply any necessary sealer before the topcoat.
  3. Select the data sheet for the colour. 7166C for other colours is not suitable for aluminium. White 10101 / 7166W is a different version: on aluminium the epoxy system must have a dry film thickness of at least 300 µm, together with the other preparation specified in the data sheet; no electrical contact between copper paint and aluminium. Check the identification on the white package being sold.
  4. Stir and paint. Stir thoroughly. Apply by brush, roller or paint pad. PDS: 1 coat / boating season, 40 µm dry film; for boats regularly exceeding 20 knots, check the recommendation of 3 coats against the package's application limits too. Wet film is 66 µm for 7166C and 68 µm for white 7166W; coverage 15 m²/l. Thin by no more than 5 % with a thinner permitted on the package; the PDS specifies 08080, and suitability of the current 808/08081 product must be confirmed.
  5. Wait between coats. At least 4 h at +20 °C, 3 h at +30 °C. At +10 °C: at least 8 h for 7166C, 7 h for 7166W. The table gives no maximum interval, but wash off dirt and dry the surface before continuing. Surface at least 3 °C above the dew point, RH below 85 %.
  6. Launch and maintain. PDS: launch no earlier than 24 h at +20 °C and within 6 months. At other temperatures follow your package and system instructions. Do not interpret touch dryness after 15 minutes as permission to launch. Collect paint and wash waste appropriately and read the colour's SDS.

Download the detailed work instructions and the manufacturer’s technical documents from the Additional Information tab.

Venemaalit.fi work instructions

Open work instructions (PDF) · FI / SV / EN ↗
TypeSelf-polishing antifouling containing biocides
Versions7166C other colours; 7166W White 10101
Film thickness / coverage40 µm dry; 15 m²/l; wet 66 / 68 µm depending on version
Recoating interval with the same product at +20 °CAt least 4 h; no maximum interval in the table
LaunchingAt least 24 h at +20 °C; maximum 6 months
ThinningMaximum 5 %; check the thinner permitted on the package

Downloadable materials

Manufacturer’s product data sheet, Finnish (PDF)

White Mille Xtra 7166W – product data sheet (PDF)

Safety

The following information was checked against the Finland-specific safety data sheets linked above. Also check the labelling on your own package and all protective measures specified in the SDS.

Mille Xtra Black 19990, Mille Xtra Grey 12400: Danger.

  • H226 – Flammable liquid and vapour.
  • H316 – Causes mild skin irritation.
  • H318 – Causes serious eye damage.
  • H410 – Very toxic to aquatic life with long lasting effects.

Mille Xtra White 10101, separate version: Warning.

  • H226 – Flammable liquid and vapour.
  • H316 – Causes mild skin irritation.
  • H336 – May cause drowsiness or dizziness.
  • H373 – May cause damage to organs through prolonged or repeated exposure. (central nervous system (CNS))
  • H410 – Very toxic to aquatic life with long lasting effects.

In this review version, the separate SDSs for all other colours sold are still being completed. The documents named above apply only to the specified colours and versions.

The linked Finnish SDSs restrict use to seawater areas; not for fresh water. Spray application only for professional use. Follow the current restrictions on your own package. Use antifouling paints safely. Always read the label and product information before use.

Venemaalit.fi work instructions

Open work instructions (PDF) · FI / SV / EN ↗

Recently Viewed Products