Hempel

Hempel Classic Antifouling

Antifouling paint, also known as toxic paint, which prevents vegetation growth.

Sale price 30,80 € Regular price 44,00 €
30% off
Tax included. Shipping from €6.95. Final cost at checkout.

Varastossa

Size: 0.75L
Colour: Green
View product colour samples

Hempel Classic Antifouling · colour samples for this product.

Upper sample: dry, before launching. Lower sample: wet, immersed.

Choose a colour by clicking a sample or using the colour selector above. Screen colours are indicative; check the colour before painting.

Calculate how much you need

Hempel Classic Antifouling

Enter the area to see how much paint and how many tins you need.

Calculation: 13.0 m²/l/coat. Actual consumption may be higher. Select the number of coats for your project: one coat is usually not enough for a complete treatment of a new surface. Other products in the system are not included in the calculation.

View product information
Payment methods
  • Klarna
  • Mastercard
  • MobilePay
  • Visa

Free collection from our store · 14-day right of withdrawal – see terms

Usually dispatched within 1–3 business days
Free pickup from store
Questions? Customer service will help you

Coverage: 12.5m2/L
Thinner:
Thinner 808

Previous paint coat: Hempel’s Underwater Primer, Hempel Light Primer

Next paint coat: –

Signal word: Danger

Hazard statements:
H226 - Flammable liquid and vapor.
H318 - Causes serious eye damage.
H315 - Causes skin irritation.
H335 - May cause respiratory irritation.
H410 - Very toxic to aquatic life with long lasting effects.

Precautionary statements:
If medical advice is needed, have product container or label at hand. Keep out of reach of children.
Avoid breathing vapor, spray or mist. Wear protective gloves/protective clothing/
eye protection/face protection. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Immediately call a POISON CENTER or doctor.
Store in a cool place. Store in a locked area.
Dispose of contents and container in accordance with local, regional, national, and international regulations.

Hazardous ingredients:
Solvent naphtha (petroleum), light aromatic; Low boiling point naphtha - unspecified
Cuprous oxide

Stir product well before use.

Always remember to ensure all surfaces are clean, oil-free, and dry. Clean the surface and remove any oil and grease, then sand the surface with dry sandpaper. Carefully remove dust with fresh water.

Unpainted surface:

Unpainted surface: Apply Hempel’s Light Primerprimer to the pre-treated surface and apply Hempel’s Underwater Primeradhesion primer while the epoxy surface is still tacky.

Old self-polishing or conventional antifouling paint:Remove loose material and other impurities by cleaning with high-pressure fresh water.

Existing hard antifouling paint or unknown antifouling paint:Clean with high-pressure fresh water, wet sand, remove dust. Clean and dry the surface. If the condition of the old antifouling paint is poor, apply one coat of Hempel’s Underwater Primeradhesion primer.

Painting:

Apply antifouling paint in one coat of 40 microns dry film thickness per boating season. Apply an additional coat near the waterline and in areas subject to significant wear. Use protective gloves/clothing and eye/face protection.

Product compatibility

Previous paint layer: Recommended products are: Hempel’s Light Primer; Hempel’s Underwater Primer

Shelf life: 5 years from the date on the lid

Venemaalit.fi work instructions

Open work instructions (PDF) · FI / SV / EN ↗

Safety Data Sheet: Hempel Classic

Product Data Sheet: Hempel Classic

Removing old paint and antifouling

Removing old paint and antifouling is easy with Hempel’s Paint
Stripper, which is an effective solvent-based paint stripper. It can be used on most painted and varnished surfaces.

  • You can estimate the time required by first testing on a small area.
  • Apply a generous amount of Hempel’s Paint Stripperto a dry surface with a brush or roller.
  • Be careful when using the product on plastic surfaces (it can damage some thermoplastics, e.g. ABS).
  • Do not work on too large an area at a time.
  • After application, wait 15–30 minutes for the paint film to dissolve or detach. (Antifouling paints, alkyd paints, and varnishes react fastest, whereas silicone and epoxy take longer to dissolve.)
  • It is recommended to cover the treated area with aluminum foil to prevent the active ingredients from evaporating too quickly.
  • Scrape off the old paint, then clean the surface with hot water and Hempel’s Boat Shampoo.
  • If the paint film is old or very thick, it may require repeated treatment to remove.

 

Cleaning and degreasing

Thorough pre-treatment is a prerequisite for a successful painting job. The surface to be painted must be clean and free of grease.

Cleaning

Hempel’s Pre-Cleanis an effective detergent for pre-cleaning gelcoat and painted surfaces to remove fuel, oil, grease, wax, and silicone. Use before painting and for deep cleaning.• For general cleaning, use 1 part Hempel’s Pre-Cleanto 20 parts water, and for more demanding cleaning, a ratio of 1:10.• For alkaline-sensitive surfaces, such as aluminum, dilute the product with water in a 1:20 ratio.

• Do not use on untreated wood that may absorb water.

Hempel’s Pre-Cleanis also suitable for cleaning hardened paint from brushes.DegreasingRemove surface dirt, especially waxes or silicone, from a new gelcoat surface using Hempel’s Degreaser. It cannot be used with traditional one-component painting systems, as Hempel’s Degreasersolvents can damage the paint film.• Work in a well-ventilated area and use a clean, absorbent, and lint-free cloth soaked in

Hempel’s Degreaser.

• Clean an area of approximately 1 m² at a time by moving the cloth lengthwise. Change the cloth before treating the next section. Use protective gloves and safety glasses.• Wipe off any excess

Hempel’s Degreaserfrom the surface with a new dry cloth.

Product Description: Hempel’s Classic 71220 is an effective, polishing (ablative) antifouling paint that provides good protection throughout the boating season.

Recommended use: Can be used as an antifouling paint on fiberglass, wood, plywood, and steel boats. Do not paint aluminum or other light metals. Direct contact can cause corrosion. Suitable for low cruising speeds.

Flash Point: 36°C [97°F]

VOC content: 426g/L

Product code: 71220

Standard shade* / code: Black 19990

Gloss: Semi-matte

 

Venemaalit.fi work instructions

Open work instructions (PDF) · FI / SV / EN ↗

Recently Viewed Products