Hempel Sealer 599 0.75L

Concrete:Remove mold release agents and other contaminants by emulsifier washing followed by high-pressure fresh water washing. Remove laitance and loose material and prepare the surface to be hard, rough, and uniform, preferably by abrasive blasting or possibly by other mechanical treatment or acid etching. Seal the surface with a suitable pore filler in accordance with the appropriate painting specification.

Thermal Sprayed Metal Coatings:Must be applied soon after application of the metal layer. Permissible to prevent possible contamination of the porous coating.

Mixing ratio:4:1 by volume

Pot life:8 hours

Safety Data Sheet: Hempel Sealer Base, Hempel Curing Agent

Product Data Sheet: Hempel Sealer

Product description
Hempel's Sealer is a two-component low-viscosity epoxy pore sealer with good penetration properties. Ideal for porous surfaces.

Recommended use
Can be used on wood and plywood surfaces. Suitable for saturating fiberglass laminate after gelcoat has been removed (osmosis damage repair). Intended for interior and exterior use, both above and below the waterline.

Flashpoint
26°C [79°F]

VOC content, mixed product
606g/L

Handling
Handle with care. Read all warning and safety texts on the packaging and paint containers before and during use, and observe local and national regulations during use. Always refer to Hempel's Safety Data Sheet in addition to the Product Data Sheet for more detailed product information.

Product code
05991

Product components
Base 05999 Curing agent 95040

Standard shade / code
Transparent 00000

Gloss
Matt

Dry matter content
29 ± 2%

Specific gravity
0.9 kg/L [8 lb/US gal]

Dry film thickness, reference
30 microns [1.2 mils]